Supply, installation, and testing of 1 inch (25.4 mm) I.D. rubber hydraulic hose conforming to standards of SAE International (SAE 100 R1 / R2 / R6 / R7 / R8 / R9 / R12 as applicable), manufactured with an oil-resistant synthetic rubber inner tube, reinforced with high tensile steel wire braid, spiral wire, textile braid, or thermoplastic reinforcement depending on hose type, and covered with abrasion, weather, and oil-resistant synthetic rubber outer cover suitable for heavy-duty industrial and hydraulic applications. The hose shall be capable of transmitting petroleum-based hydraulic fluids with working pressure and burst pressure ratings as per SAE specifications (burst pressure minimum four times the working pressure) and suitable for operating temperatures ranging from –40°C to +100°C. The hose shall be used for hydraulic power packs, construction machinery, industrial hydraulic systems, agricultural equipment, and other heavy machinery, and shall be supplied in required lengths, properly marked with manufacturer name, hose type, size, pressure rating, and standard reference, complete with factory testing, inspection, and protective end caps to prevent contamination or damage during transportation and installation. 1' I.D. (25.4 mm) Rubber Hydraulic Hose SAE Standard SAE International SAE 100 R1 SAE 100 R2 SAE 100 R6 SAE 100 R7 SAE 100 R8 SAE 100 R9 SAE 100 R12 Oil Resistant Inner Tube Synthetic Rubber Steel Wire Braid Reinforcement Spiral Wire Reinforcement Textile Reinforcement Abrasion Resistant Cover Weather Resistant High Pressure Hydraulic Application Temperature Range –40°C to +100°C Hydraulic Oil Compatible Industrial Machinery Construction Equipment Pressure Tested Hose